Starter Strip Shingles SDS - 1003A
Safety Data Sheets
A starter strip for any GAF asphalt shingle
Reduce the risk of blow-offs at the eaves and rakes and help unlock stronger wind warranty coverage for qualifying shingles with WeatherBlocker™ Premium Starter Strip Shingles.1 Create a clean, straight edge and a strong bond to the shingle course with proprietary Dura Grip™ adhesive that helps lock down shingle edges at the eaves and rakes.
- An extra-wide starter strip designed to be compatible with all GAF asphalt shingles
- A fast, efficient alternative to hand-cutting 3-tab shingles as starter course
- Eligible for a Lifetime Limited Warranty when installed with GAF Lifetime shingles and at least two additional qualifying GAF accessories†
- GAF offers increased wind coverage on many GAF shingles when you use GAF starter strip shingles and follow special installation instructions1
This product has earned the Good HouseKeeping Seal.
1Special installation is required. See GAF Shingle and Accessory Limited Warranty available at gaf.com/warranties for coverage, restrictions and qualifying shingles.
†Lifetime refers to the length of warranty coverage provided and means as long as the original individual owner(s) of a single-family detached residence [or the eligible second owner(s)] owns the property where the qualifying GAF products are installed. For other owners/structures, Lifetime coverage is not applicable. Lifetime coverage on shingles requires the use of GAF Lifetime shingles only. Lifetime coverage on shingles and accessories requires the use of any GAF Lifetime Shingle and at least 3 qualifying GAF Accessories. See GAF Roofing System Limited Warranty for complete coverage and restrictions. Visit gaf.com/LRS for qualifying GAF products. For installations not eligible for the GAF Roofing System Limited Warranty, see the GAF Shingle & Accessory Limited Warranty.
The starter strip shingle that stands out
Choose WeatherBlocker™ Premium Starter Strip Shingles as part of your GAF roofing system.
-
Efficient
Fast, efficient alternative to cutting-up 3-tab shingles for starter strips. -
Excellent Performance
Dura Grip™ adhesive helps lock down the shingle edges at the eaves and rakes to reduce the risk of shingle blow-off -
Compatibility
Specifically designed to be compatible with all GAF asphalt shingles
Enhance protection and aid installation
The premium, extra-wide starter strip helps reduce the risk of shingle blow-offs at eaves and rakes and is compatible with all GAF asphalt shingles. The pre-perforated design reduces time-consuming cutting on the roof, saving time and providing a clean, finished look.
Unlock powerful warranty protection
When you install any GAF Lifetime Shingle and at least 3 qualifying GAF accessories, you qualify for a Lifetime limited warranty on your shingles and all qualifying GAF accessories†.
† Lifetime refers to the length of warranty coverage provided and means as long as the original individual owner(s) of a single-family detached residence [or the eligible second owner(s)] owns the property where the qualifying GAF products are installed. For other owners/structures, Lifetime coverage is not applicable. Lifetime coverage on shingles requires the use of GAF Lifetime Shingles only. Lifetime coverage on shingles and accessories requires the use of any GAF Lifetime Shingle and at least 3 qualifying GAF Accessories. See GAF Roofing System Limited Warranty for complete coverage and restrictions. Visit gaf.com/LRS for qualifying GAF products. For installation not eligible for the GAF Roofing System Limited Warranty, see the GAF Shingle & Accessory Limited Warranty.
What is a starter strip shingle?
GAF starter strips help protect against blow-offs at the eaves and rakes, can unlock stronger wind warranty coverage for qualifying shingles¹ and eliminate the need to manually cut up 3-tab shingles to make starter strips.
¹Special installation is required. See GAF Shingle and Accessory Limited Warranty available at gaf.com/warranties for coverage, restrictions and qualifying shingles.
WeatherBlocker™ Premium Starter Strips Installation — step-by-step
-
Step 1
Separate the strips into half pieces at the perforated line. -
Step 2
Place at the eaves and rakes, leaving a .25” to .75” overhang, sealant facing up, at the edge. -
Step 3
Nail about 1.5” - 3” above the starter strip’s edge and put 4 nails into the strip at about 1.5”, 13.5”, 25.5” and 37.5” across the strip. -
Step 4
Install half pieces vertically up the rake. Overlap the eave edge starter strip at least 3” with the sealant nearest the edge. -
Half Strip
For shingles with an exposure less than 6” use a half 8.5” strip by tearing on the perforation line. -
Full Strip
For shingles with an exposure of 6” or greater use a full 17” strip. Do not separate the strips.
Always read full application instructions at GAF.COM before using or installing GAF products.
Product Documentation
-
-
-
-
-
-
-
.jpg?width=80)
WeatherBlocker™ Installation Instructions - RESGN852
Installation Instructions and Guides
-_data-sheet.jpg?width=80)
Ridge cap shingles
The finishing touch that helps defend against leaks at the hips and ridges.
Rooftop accessories
Specialty roofing accessories designed to enhance the performance of your roofing system.
Frequently Asked Questions
Starter strip shingles help reduce the risk of shingle blow-offs at the eaves and rakes that can lead to damaging leaks. Some manufacturers offer stronger wind warranty coverage for qualifying shingles when starter strips and special installation methods are used.
Our proprietary Dura Grip™ adhesive creates a strong bond between shingle layers. This long, black strip of tacky adhesive activates after installation when sunlight heats the shingles.
WeatherBlocker™ Premium Starter Strip Shingles have factory applied, properly positioned Dura Grip™ Adhesive which helps lock down shingle edges at the eaves and rakes to reduce the risk of shingle blow-offs.
WeatherBlocker™ provides either 50 linear feet or 100 linear ft of coverage per bundle. 100 linear feet is the maximum coverage when splitting the perforated full sheets into half. 50 linear feet applies when you use the full sheets without splitting them.
Yes, GAF WeatherBlocker™ Premium Starter Strip Shingles are compatible with all GAF residential asphalt shingles.
As per our installation instructions, nail approximately 1 1/2" - 3" (38-76 mm) above the edge of the starter strip.
Both WeatherBlocker™ and Pro-Start® starter strip shingles provide an efficient alternative to field-cutting strip shingles for installation along eaves and rakes. Their Dura Grip™ adhesive helps lock down shingles edges at eaves and rakes to reduce the risk of blow-offs. While Pro-Start® may be a more affordable option, WeatherBlocker™ Premium Starter Strip Shingles are extra-wide for compatibility with all GAF asphalt shingles.
You can purchase WeatherBlocker™ Premium starter strip shingles at several major home improvement retailers, independent building supply centers, and specialized roofing distributors. Please reach out to your local Territory Manager for more information.