EnergyGuard RA Tapered Polyiso Insulation Data Sheet CANADA - COMGT477C
Brochures and Literature
EnergyGuard™ Tapered Polyiso Insulation
EnergyGuard™ Tapered Polyiso Insulation systems are a series of tapered and fill panels that, when properly installed on a low-slope roof, help drive water to the drain, thus prolonging the life of your roof system. Available in 1/16”, 1/8”, 3/16”, 1/4”, 3/8”, and 1/2” per foot slope, in both standard and extended panels.
- System Approval Mod Bit, BUR, single-ply
- Evaluation Report UL ER1306-03
- FM Approved 4450/4470
- UL 1256/790/263
- UL Class A over Combustible Decks* Cover board required
- Miami-Dade County Product Controlled Approved
- State of Florida Approved
- Green Circle Certified For Recycled Content
- ASTM C1289 Type II, Class 1 Grade 2 (20 psi) or Grade 3 (25 psi)
- For Canada approvals and Data Sheet see Product Documentation Section
*See UL iQ for assembly details.
For additional information, email The GAF Tapered Design Group at tdg@gaf.com
Features & Benefits
EnergyGuard™ Tapered Insulation offers high thermal efficiency while addressing ponding water by employing lightweight, easy-to-cut panels that are available in a variety of slopes and compatible with a variety of roof systems.
-
TAPERED DESIGN
Properly design tapered systems virtually eliminate ponding water, email the Tapered Design Group for assistance at tdg@gaf.com -
VERSATILE
Compatible with TPO and PVC in adhered, mechanically attached and induction welded systems. -
EASY TO INSTALL
Lightweight and easy to cut in the field, making handling and installation easier and more efficient.
Product Documentation
-
-
EnergyGuard SDS - 1088
Safety Data Sheets
-
EnergyGuard Tapered 4x8 Q Panels - COMGT502
Brochures and Literature
-
EnergyGuard Tapered ISO Packaging Weight Chart - COMGT464
Installation Instructions and Guides
-
EnergyGuard Tapered Polyiso GreenGuard Gold Certificate
Sustainability Documentation
-
-
EnergyGuard Tapered Polyiso Roof Insulation GreenCircle Recycled Content Certifications
Sustainability Documentation
-
EnergyGuard Tapered Pre-Cut Products - COMGT512
Data Sheets
-
Minimum R Value Requirements by State
Technical Bulletins and Notes
Learn about tapered polyiso products, design, and installation tips
Our full line of EnergyGuard™ tapered insulation is just the beginning. Learn about products, systems, and design info, instructional videos, and installation tips, or start a conversation by connecting with experts in your region.
Connect with a specialist on custom tapered solutions for your project
The GAF Tapered Design Group offers dedicated tapered design specialists throughout North America, delivering efficient tapered solutions with your specific project in mind. Services include tapered design, layout strategies, product suggestions, and more.
Need an immediate assistance? Email tdg@gaf.com
Tapered systems labeled by area boost on-site efficiency
To help increase efficiency unloading, sorting, and staging, GAF can ship your complete tapered system pre-sorted and pre-labeled by roof area. For more information, please, email the GAF Tapered Design Group at tdg@gaf.com.
Save time, labor and waste with Tapered Pre-cut roofing products
Pre-cut Hips & Valleys ship ready-to-install
(no product waste) as part of your tapered design. Available in a limited number of panel designations in the following products EnergyGuard™ Tapered, EnergyGuard™ Ultra Tapered, EnergyGuard™ NH Tapered, EnergyGuard™ NH Ultra Tapered.
Limited availability.
Pre-cut Sumps drive water inward to lowest point of slope and includes circle marks to guide cutting the center to access the drain. Available in EnergyGuard™ Ultra Tapered 25 psi only. Limited availability. For more information, please, email the GAF Tapered Design Group at tdg@gaf.com.
Drive water toward roof drains to promote positive drainage
-
This 1/2” slope diamond cricket is made from EnergyGuard™ Tapered panels.
-
This diamond cricket uses EnergyGuard™ Tapered panels to provide additional slope to divert water to a roof drain.
-
EnergyGuard™ Tapered panels are available in both standard and extended panel profiles, 20 and 25 psi, and in a variety of slopes for low slope roofs.
-
This Tapered EnergyGuard™ diamond cricket uses tapered edge strips to transition smoothly between elevations.
-
EnergyGuard™ Tapered in a reroof application installed using low rise foam.
-
Tear off roof application: 60 mil TPO, fully adhered, 2 way tapered system with crickets
Related Profiles
Commercial roofing products: solutions for every roofing need
From single-ply membranes to full system solutions, and state-of-the-art digital services to hands-on training. GAF other the range of durable, easy-to-use products and services you need to succeed.
Resources for every professional
Contractors
We’re building new plants for greater capacity, and better systems for faster response and greater visibility.
Contractor Resources
Architects & Design Pros
We’re building better, faster, more accurate access to the information you need.
Design Resources
Property managers & owners
Whether you manage one property or many, we’re building the products and programs you need to reroof, restore, or maintain your investment.
Building Resources
Roofing suppliers
Whether you manage one property or many, we’re building the products and programs you need to reroof, restore, or maintain your investment.
Dealer Resources