About Drill-Tec™ 2 3/8" Barbed XHD Plate

Drill-Tec™ Barbed XHD Plates are made of coated Galvalume® steel and have a round design that provides an even distribution of loads and eliminates sharp corners that can damage the membrane.

  • Attaches EverGuard® membranes to the substrate
  • Drill-Tec™ 2 3/8" Barbed XHD Plate should be used for lap seam fastening.
  • Designed to be used with appropriate Drill-Tec Fasteners depending on the substrate type.
Note: Galvalume® is a registered trademark of BIEC International Inc. and some of its licensed producers.

Product Documentation