RoofViews

Residential Roofing

How to Plan a Balanced Attic Ventilation System

By Dawn Killough

January 10, 2020

Attic ventilation

When considering replacing your roof, you'll need to calculate the amount of attic ventilation needed to help reduce excess heat and moisture in your attic. Excess heat and moisture can lead to premature roof system degradation and damaging ice dams in the winter.

Let's take a closer look at the process of calculating how much attic ventilation you'll need to to properly ventilate the attic space.

What Is the Balanced Ventilation Rule?

The balanced ventilation rule states that the amount of air coming in from the intake vents at or near the soffit area of the roof should always match that of the exhaust vents at or near the ridge of the roof. This ensures that a balanced amount of air enters and exits the attic space.

Any imbalance of intake and exhaust—such as having more exhaust than intake—can make the system less effective by reducing the amount of warm, moist air that escapes the exhaust vents. A proper amount of intake ventilation will help the exhaust ventilation function more efficiently.

Care must always be taken to avoid mixing different types of exhaust vent products. Using different types on the same attic space can also cause an imbalanced system.

How to Calculate a Balanced Attic Ventilation System

The most effective attic ventilation system is a balanced one, with equal amounts of air coming in and going out. This continuous, balanced flow of air helps to reduce overheating and moisture build-up, which can result in ice damming and damage to your roofing system.

1. Measure Attic Floor Space

Calculate Attic Roof

Start by measuring the square footage of attic floor space. For example, if the attic is 30 ft. wide and 40 ft. long, multiplying those numbers together would reveal a total square footage of 1,200 sq. ft.

2. Calculate the Net Free Ventilation Area

Calculating the Net Free Ventilation Area (NFVA) uses the 1:300 rule. Let's dig a bit deeper:

What Are NFVA Ratings?

NFVA is a measure of open area in a roof vent that allows for air to move through it. Also called Net Free Ventilation (NFV) or Net Free Area (NFA), this rating is used to determine how much airflow is needed for the total attic space, as well as how much is needed for intake and exhaust. The types and quantity of roof vents are calculated based on this measurement.

What Is the 1:300 Rule?

The US Federal Housing Authority recommends a minimum of 1 square foot of attic ventilation for every 300 square feet of attic floor space, evenly split between intake and exhaust.

The NFVA is calculated by dividing the total attic square footage by 300, the minimum recommendation for a balanced ventilation system, or the number stipulated by local codes. In our example, we divide 1,200 by 300 to get 4 sq. ft. NFVA needed for attic space.

Most roof ventilation products come with a NFVA rating in square inches, not square feet. To convert the NFVA for the attic space into square inches, multiply it by 144, the number of inches in a square foot. In our example, 4 times 144 equals 576 sq. in. NFVA.

A balanced ventilation system requires equal intake and exhaust. To find out how much ventilation is needed for each side of the system, simply divide the NFVA in square inches in half. In our example, we divide 576 in half and get 288 sq. in. NFVA needed at both the intake (at the soffits) and exhaust (at the ridge).

Intake and Exhaust

3. Select the Right Intake and Exhaust Ventilation Products

The next step is to select the correct ventilation products for your attic. The GAF attic ventilation calculator can tell you the types and quantities of vents that you'll need for your roof based on your attic dimensions.

You can also visit the GAF ventilation and attic vents product page to help you select the intake and exhaust vents for your roof. It's important to consult with a local roofing contractor for advice on the best products for your specific property and house.

4. How to Place Intake and Exhaust Ventilation

Intake ventilation is installed at the lowest part of the attic space, generally at the soffit or base of the roof. Exhaust ventilation is installed at the highest part of the attic space, which is typically at the ridge or apex of the roof.

Homeowners should always discuss the placement of their intake and exhaust vents with a professional.

How Do You Size a Power Attic Vent?

If you're looking to utilize a powered attic vent to help reduce heat and moisture from your attic space, it's important to remember that it should never be mixed with ridge vents or other types of non-powered exhaust vents. Typically, powered attic vents are rated by the amount of square footage they can ventilate. By calculating your total attic floor square footage, you can then figure out the number powered attic vents needed to properly ventilate your attic space.

For more information about calculating and planning a balanced ventilation system for your attic, consult with a contractor certified by GAF*.



*Contractors enrolled in GAF certification programs are not employees or agents of GAF, and GAF does not control or otherwise supervise these independent businesses. Contractors may have agreed that they will use GAF roofing products, and may receive benefits, such as loyalty rewards points and discounts on marketing tools from GAF for participating in the program.


About the Author

Dawn Killough is a freelance writer in the construction, finance, and accounting fields. She is the author of an ebook about green building and writes for construction tech and green building websites. She lives in Salem, Oregon with her husband and four cats.

Related Articles

Installation of ISO Board and TPO on a Roof
Building Science

Roof Insulation: A Positive Investment to Reduce Total Carbon

Have you ever thought about building products reducing the carbon dioxide emissions caused by your building? When considered over their useful life, materials like insulation decrease total carbon emissions thanks to their performance benefits. Read on for an explanation of how this can work in your designs.What is Total Carbon?Total carbon captures the idea that the carbon impacts of buildings should be considered holistically across the building's entire life span and sometimes beyond. (In this context, "carbon" is shorthand for carbon dioxide (CO2) emissions.) Put simply, total carbon is calculated by adding a building's embodied carbon to its operational carbon.Total Carbon = Embodied Carbon + Operational CarbonWhat is Embodied Carbon?Embodied carbon is comprised of CO2 emissions from everything other than the operations phase of the building. This includes raw material supply, manufacturing, construction/installation, maintenance and repair, deconstruction/demolition, waste processing/disposal of building materials, and transport between each stage and the next. These embodied carbon phases are indicated by the gray CO2 clouds over the different sections of the life cycle in the image below.We often focus on "cradle-to-gate" embodied carbon because this is the simplest to calculate. "Cradle-to-gate" is the sum of carbon emissions from the energy consumed directly or indirectly to produce the construction materials used in a building. The "cradle to gate" approach neglects the remainder of the embodied carbon captured in the broader "cradle to grave" assessment, a more comprehensive view of a building's embodied carbon footprint.What is Operational Carbon?Operational carbon, on the other hand, is generated by energy used during a building's occupancy stage, by heating, cooling, and lighting systems; equipment and appliances; and other critical functions. This is the red CO2 cloud in the life-cycle graphic. It is larger than the gray CO2 clouds because, in most buildings, operational carbon is the largest contributor to total carbon.What is Carbon Dioxide Equivalent (CO2e)?Often, you will see the term CO2e used. According to the US Environmental Protection Agency (EPA), "CO2e is simply the combination of the pollutants that contribute to climate change adjusted using their global warming potential." In other words, it is a way to translate the effect of pollutants (e.g. methane, nitrous oxide) into the equivalent volume of CO2 that would have the same effect on the atmosphere.Today and the FutureToday, carbon from building operations (72%) is a much larger challenge than that from construction materials' embodied carbon (28%) (Architecture 2030, 2019). Projections into 2050 anticipate the operations/embodied carbon split will be closer to 50/50, but this hinges on building designs and renovations between now and 2050 making progress on improving building operations.Why Insulation?Insulation, and specifically continuous insulation on low-slope roofs, is especially relevant to the carbon discussion because, according to the Embodied Carbon 101: Envelope presentation by the Boston Society for Architecture: Insulation occupies the unique position at the intersection of embodied and operational carbon emissions for a building. Insulation is the only building material that directly offsets operational emissions. It can be said to pay back its embodied carbon debt with avoided emissions during the building's lifetime.A Thought Experiment on Reducing Total CarbonTo make progress on reducing the total carbon impact of buildings, it is best to start with the largest piece of today's pie, operational carbon. Within the range of choices made during building design and construction, not all selections have the same effect on operational carbon.When making decisions about carbon and energy reduction strategies, think about the problem as an "investment" rather than a "discretionary expense." Discretionary expenses are easier to reduce or eliminate by simply consuming less. In the example below, imagine you are flying to visit your client's building. Consider this a "discretionary expense." The input on the far left is a given number of kilograms of carbon dioxide equivalent (CO2e) generated for the flight, from the manufacturing of the airplane, to the fuel it burns, to its maintenance. The output is the flight itself, which creates CO2 emissions, but no durable good. In this case, the only CO2 reduction strategy you can make is to make fewer or shorter flights, perhaps by consolidating visits, employing a local designer of record, or visiting the building virtually whenever possible. Now consider the wallpaper you might specify for your client's building. It involves a discretionary expenditure of CO2e, in this case, used to produce a durable good. However, this durable good is a product without use-phase benefits. In other words, it cannot help to save energy during the operational phase of the building. It has other aesthetic and durability benefits, but no operational benefits to offset the CO2 emissions generated to create it. Your choices here are expanded over the previous example of an airplane flight. You can limit CO2 by choosing a product with a long useful life. You can also apply the three Rs: reduce the quantity of new product used, reuse existing material when possible, and recycle product scraps at installation and the rest at the end of its lifespan. In the final step in our thought experiment, consider the insulation in your client's building. As before, we must generate a certain amount of CO2e to create a durable good. In this case, it's one with use-phase benefits. Insulation can reduce operational energy by reducing heat flow through the building enclosure, reducing the need to burn fuel or use electricity to heat and cool the building. The good news is that, in addition to the other strategies considered for the flight and the wallpaper, here you can also maximize operational carbon savings to offset the initial embodied carbon input. And, unlike the discretionary nature of some flights and the often optional decision to use furnishings like wallpaper, heating and cooling are necessary for the functioning of almost all occupied buildings.Based on this example, you can consider building products with operational benefits, like insulation, as an "investment." It is appropriate to look at improving the building enclosure and understanding what the return on the investment is from a carbon perspective. As the comparison above demonstrates, if you have a limited supply of carbon to "invest", putting it into more roof insulation is a very smart move compared to "spending" it on a discretionary flight or on a product without use-phase carbon benefits, such as wallpaper.This means we should be careful not to measure products like insulation that save CO2e in the building use-phase savings only by their embodied carbon use, but by their total carbon profile. So, how do we calculate this?Putting It to the TestWe were curious to know just how much operational carbon roof insulation could save relative to the initial investment of embodied carbon required to include it in a building. To understand this, we modeled the US Department of Energy's (DOE) Standalone Retail Prototype Building located in Climate Zone 4A to comply with ASHRAE 90.1-2019 energy requirements. We took the insulation product's embodied energy and carbon data from the Polyisocyanurate Insulation Manufacturers Association's (PIMA) industry-wide environmental product declaration (EPD).To significantly reduce operational carbon, the largest carbon challenge facing buildings today, the returns on the investment of our building design strategies need to be consistent over time. This is where passive design strategies like building enclosure improvements really shine. They have much longer service lives than, for example, finish materials, leading to sustained returns.Specifically, we looked here at how our example building's roof insulation impacted both embodied and operational carbon and energy use. To do this, we calculated the cumulative carbon savings over the 75-year life of our model building. In our example, we assumed R-30 insulation installed at the outset, increased every 20 years by R-10, when the roof membrane is periodically replaced.In our analysis, the embodied CO2e associated with installing R-30 (shown by the brown curve in years -1 to 1), the embodied carbon of the additional R-10 of insulation added every 20 years (too small to show up in the graph), and the embodied carbon represented by end-of-life disposal (also too small to show up) are all taken into account. About five months after the building becomes operational, the embodied carbon investment of the roof insulation is dwarfed by the operational savings it provides. The initial and supplemental roof insulation ultimately saves a net of 705 metric tons of carbon over the life of the building.If you want to see more examples like the one above, check out PIMA's study, conducted by the consulting firm ICF. The research group looked at several DOE building prototypes across a range of climate zones, calculating how much carbon, energy, and money can be saved when roof insulation is upgraded from an existing baseline to current code compliance. Their results can be found here. Justin Koscher of PIMA also highlighted these savings, conveniently sorted by climate zone and building type, here.Support for Carbon Investment DecisionsSo how can you make sure you address both operational and embodied carbon when making "carbon investment" decisions? We've prepared a handy chart to help.First, when looking at lower-embodied-carbon substitutions for higher-embodied-carbon building materials or systems (moving from the upper-left red quadrant to the lower-left yellow quadrant in the chart), ensure that the alternatives you are considering have equivalent performance attributes in terms of resilience and longevity. If an alternative material or system has lower initial embodied carbon, but doesn't perform as well or last as long as the specified product, then it may not be a good carbon investment. Another consideration here is whether or not the embodied carbon of the alternative is released as emissions (i.e. as part of its raw material supply or manufacturing, or "cradle to gate" stages), or if it remains in the product throughout its useful life. In other words, can the alternative item be considered a carbon sink? If so, using it may be a good strategy.Next, determine if the alternative product or system can provide operational carbon savings, even if it has high embodied energy (upper-right yellow quadrant). If the alternative has positive operational carbon impacts over a long period, don't sacrifice operational carbon savings for the sake of avoiding an initial embodied product carbon investment when justified for strategic reasons.Last, if a product has high operational carbon savings and relatively low embodied carbon (lower-right green quadrant), include more of this product in your designs. The polyiso roof insulation in our example above fits into this category. You can utilize these carbon savings to offset the carbon use in other areas of the design, like aesthetic finishes, where the decision to use the product may be discretionary but desired.When designing buildings, we need to consider the whole picture, looking at building products' embodied carbon as a potential investment yielding improved operational and performance outcomes. Our design choices and product selection can have a significant impact on total carbon targets for the buildings we envision, build, and operate.Click these links to learn more about GAF's and Siplast's insulation solutions. Please also visit our design professional and architect resources page for guide specifications, details, innovative green building materials, continuing education, and expert guidance.We presented the findings in this blog in a presentation called "Carbon and Energy Impacts of Roof Insulation: The Whole[-Life] Story" given at the BEST6 Conference on March 19, 2024 in Austin, Texas.References:Architecture 2030. (2019). New Buildings: Embodied Carbon. https://web.archive.org/web/20190801031738/https://architecture2030.org/new-buildings-embodied/ Carbon Leadership Forum. (2023, April 2). 1 - Embodied Carbon 101. https://carbonleadershipforum.org/embodied-carbon-101/

By Authors Elizabeth Grant

September 13, 2024

Missing shingles on a roof.
Your Home

Missing Shingles on Your Roof? Here's What to Do

If you notice missing shingles on your roof, there's no need to panic. Missing shingles aren't an emergency, but you should still act quickly, especially during wet seasons. Your roof is a multilayered system designed to protect your home's structure and finishes from water damage.If you ignore missing shingles, moisture can get into your home, leading to issues such as rot, mold, and costly water damage. Replacing missing shingles quickly can mean the difference between a minor roof repair and a total roof replacement.So, here's how to spot missing shingles and hire a roofer to replace them.How to Spot Missing ShinglesLocating missing shingles, before leaks set in, can save you time, money, and peace of mind. Here are several ways to spot them before they cause bigger issues.Inspect Your Roof from the GroundScope your roof with binoculars for signs of missing shingles. Inspecting your roof from the ground helps prevent shingle damage from walking on the roof and, most importantly, fall-related injuries. Scan your roof from every angle that it's safe to do so, including from streets, sidewalks, and neighbors' yards if you have permission to do so.Check for Shingle ChangesSystematically check each shingle following a horizontal or vertical line. A missing shingle often sticks out as a color change in your shingle pattern. While you're at it, look for shingles that are cracked, curled, or sagging or that aren't aligned with the others. These can all be signs of shingle or roof damage.Review Your Roof for Damage after StormsRoof damage often happens as a result of extreme weather. Once it's safe to be outdoors, visually inspect your roof for damage. You can also survey the ground around your property to spot any shingles that may have blown off.Look Inside Your Home for LeaksCheck inside your home for longer-term signs of missing shingles. Evidence of leaks in your attic or water stains on your interior ceilings or walls can indicate wider-spread water damage in your home. If you notice anything out of the ordinary, have a roofing professional inspect the area (both inside and outside) for damage.Schedule a Professional Roof InspectionThe National Roofing Contractors Association recommends professional-level roof inspections twice a year—once in the spring and once in the fall. Like routine car maintenance keeps repair costs down, roof inspections can help spot small concerns before they potentially become expensive problems.How to Hire a RooferOnce you spot missing shingles on your roof, the next step is hiring a professional to replace them. Create a list of questions before you call around, so you can find a reliable roofing company that won't cut corners.If you have warranties, you may also want to check whether or not those have any requirements. For example, all GAF roofing shingles and qualifying accessories (the "GAF Products") come with the coverage provided by the GAF Shingle & Accessory Limited Warranty,** and you don't need to do anything at all to get it.How to Prepare for Roofing RepairsThough every contractor is different, confirm certain details before signing any contracts. Here's how you can ensure you and your contractor are on the same page before work begins:Communicate clearly from the start; this will help prevent frustration and unexpected costs.Before making a deposit, be sure you both agree on the quote and job details.Agree on the job's start date, plus a contingency plan if bad weather forces a rain check. Ask your roofer if they'll install a temporary tarp to prevent water damage in the case of a delay.Read your quote carefully. Confirm approximate labor costs and the color, style, and brand of shingles that will be installed.Ask about anticipated material quantities and estimated roofing material costs (like flashing, roofing nails, etc.).Confirm whether the repair job includes cleanup costs and if the roofer will remove any debris.When to Consider a Roof ReplacementLook at the big picture before replacing missing shingles. Consider your roof's age, any warranties on your roof system, the extent of the roof damage (both internally and externally), and whether the missing shingles are an isolated issue. Multiple missing shingles or frequent repairs could be a sign that you need a new roof.Ready to schedule a professional roof inspection? Contact a GAF-certified roofing contractor* to get started.*Contractors enrolled in GAF certification programs are not employees or agents of GAF, and GAF does not control or otherwise supervise these independent businesses. Contractors may receive benefits, such as loyalty rewards points and discounts on marketing tools from GAF for participating in the program and offering GAF enhanced warranties, which require the use of a minimum amount of GAF products. Your dealings with a Contractor, and any services they provide to you, are subject to the GAF Contractor Terms of Use.* *GAF Accessory Products covered under this limited warranty include: GAF Ridge Cap Shingles, GAF Starter Strip Shingles, GAF Leak Barrier Products, GAF Roof Deck Protection Products, and GAF Attic Ventilation Products. For a complete list of qualifying GAF products visit gaf.com/LRS. This limited warranty does not cover low-slope membranes. See gaf.com for a copy of the limited warranties covering those products.

By Authors Annie Crawford

September 10, 2024

Roofers install GAF EverGuard® TPO Quick-Spray Adhesive on a flat roof
Commercial Roofing

Minimizing Disruption When Repairing Roofs on Schools and Hospitals

As a roofing contractor, you know how noisy roofing projects can get. And when repairing or replacing roofs on institutional properties, like schools and healthcare centers, it's often not possible to remove occupants during the project's duration.Accordingly, minimizing disruption at these facilities is key, as students need to be able to concentrate and patients must be protected as they recover. Here are common disruptions to consider and how to reduce them, with insight from GAF Building and Roofing Science Research Lead, Elizabeth Grant.Common Disruptions on Construction SitesYou have several challenges to consider when working on schools or other facilities with ongoing operations, including noise, odors, and occupants' safety.Elevated VolumeHeightened noise levels can affect both students and patients. At schools, loud sounds can affect students' ability to learn and concentrate. Likewise, construction noise can impact patients' ability to rest and recuperate in healthcare facilities.Strong OdorsWhen using certain roofing materials on big job sites—like powerful adhesives or hot-mopped roofing systems—odors may infiltrate the building. This may be distracting and affect the comfort of students and patients.Heavy MachineryUnloading and staging material can also cause disruption, as materials must be staged onsite to be ready for installation as the job progresses. This often involves using heavy equipment, such as cranes and lifts. Proper safety protections must be in place to ensure worker and occupant safety.Roofing Products That Minimize DisruptionUnfortunately, there's no good time for a roof repair or replacement at a medical facility. You may be able to complete school projects when school is out of session, but that isn't always the case if a leak or storm damage occurs.The best (and most proactive) way to minimize disruption is to use durable, long-lasting materials, as this reduces the number of times crews need to work on the roof.Single-Ply MembranesGrant recommends a robust single-ply membrane or a system with some redundancy, such as a multi-ply modified bitumen. She also suggests leveraging a hybrid system, composed of a multi-ply modified bitumen system with a single-ply top sheet for reflectivity.Cover and Substrate BoardsFor resiliency against noise-causing conditions such as hail and foot traffic, Grant suggests using cover and substrate boards. Cover boards are installed on top of the insulation and provide sound insulation, while substrate boards are installed directly on the roof deck under the insulation."If you have a really noisy location, and you want to keep people inside from hearing a lot of disruption, having cover and substrate boards included in the system can be really important," says Grant.Adhesives and FastenersAnother change you can make to reduce disruption is using adhesive to attach roofing products instead of mechanically fastening them. This helps avoid the noise from driving fasteners into the roof deck—and enables a faster installation.Grant notes that, depending on the FM and wind ratings required, it may be possible to adhere all the system components, including the insulation, cover boards, and membrane. An adhesive like GAF EverGuard® TPO Quick-Spray Adhesive can effectively adhere TPO and PVC roofing materials. The product has a high initial tackiness, allowing for faster installation than traditional adhesives. You can also opt for self-adhering products (vapor retarder, pipe boots, TPO roofing, etc.), which can further reduce installation time by eliminating adhesive application from the process.Materials That Shorten Project TimelinesA creative and efficient way to minimize disruption at school and hospital job sites is to reduce the time crews are on the roof. By taking advantage of time-saving materials, you can reduce the risk to workers and occupants, increase productivity, and ultimately take on more work.In addition to the Quick-Spray Adhesive, GAF offers several materials designed to cut installation time and labor:Wider rolls of TPO (12 feet instead of 10 feet) can help crews to spend less time installing systems on wide-open roofs.Insulation installation is easier with lightweight Ultra HD Composite Insulation, and it eliminates the need for one full application of adhesive in adhered systems.TPO self-adhered membrane can cut installation time by as much as 60% compared to installation using traditional bucket and roller adhesives.Experienced Support That Streamlines WorkIn addition to product and material selection, you can minimize disruptions by having GAF professionals from the Tapered Design Group help design the tapered insulation system. These professionals can help you with a variety of services, such as:Tapered insulation designTapered insulation Inventory management and orderingBudget friendly alternativesTapered insulation systems are designed to improve the drainage slope on roofs with substrate damage or without enough slope. The tapered design team at GAF "balances suitable slope with the least amount of material," Grant says. "To help with saving money, saving material, and saving time."This group designs tapered insulation systems that can be loaded and labeled strategically to minimize material handling and time spent looking for and transporting materials. Products are bundled by roof area, and a color-coded plan distinguishes areas for each bundle. Materials are precut and specifically designed for each project.Additional Tools to Save Time and LaborTwo other GAF tools can help you reduce the time spent on projects: GAF QuickSite™ and GAF QuickMeasure™.GAF QuickSite™GAF QuickSite™ provides the information you need before approaching a potential customer. It gives you a snapshot of local codes (important if you're working in an unfamiliar location), a 10-year wind and hail history, historical photographs documenting changes over time, and parcel information (including size and sales dates).GAF QuickMeasure™GAF QuickMeasure™ provides complete roof measurements including parapet wall lengths, heights and widths to help create estimates, past views showing how a roof may have changed over time, grid-lined paper for buildings with predominate pitch of 0 or 1, and a DXF file output for CAD.With the help of GAF QuickSite™, GAF QuickMeasure™, and the Tapered Design Group, you can confidently give your healthcare clients and school customers accurate estimates for suitable roofing products to meet their needs. These tools can also minimize disruption to building occupants and help building owners select durable, long-lasting products that will protect their investments for years to come.Leveraging GAF Professionals' ExperienceWhen working on schools, hospitals, and other important institutions, you're working to satisfy not only your clients but the individuals visiting these locations. By minimizing disruption, you can help ensure everyone involved experiences minimal disruption while you complete the project.For more insight into time- and labor-saving products and services, explore GAF School Rooftop Resources.

By Authors Dawn Killough

August 29, 2024

Don't miss another GAF RoofViews post!

Subscribe now