RoofViews

Commercial Roofing

The Pros and Cons of Single-Ply Roofing Adhesives

By Karen L Edwards

August 21, 2020

A contractor applying GAF EverGuard® adhesive with a roller

The variety of single-ply roofing membrane adhesives available gives contractors some flexibility in their choice of material. But how do you know which choice is best for your project? Environment, weather, and even the use of the building can affect which adhesive is right for the job.

Keep reading to learn more about the different roofing adhesives and the pros and cons of using them on a TPO roof system.

Different Types of Single-Ply Roofing Adhesives

Different jobs call for different tools, and several factors may help determine which type of single-ply adhesive you use. Local zoning requirements, building codes, building type and use, uplift requirements, climate zone and temperature limitation, and the type of roof membrane should all be taken into consideration as you weigh your options.

  • Solvent-based roofing adhesives are typically rolled onto the substrate and back of the membrane. Once the adhesive has flashed off, the surfaces can be mated. Solvent-based adhesives may have a noticeable odor, making them less ideal for occupied buildings. They also require temperatures to be at least 40 degrees Fahrenheit (4.44 °C) for application
  • Water-based single-ply roofing adhesives are typically applied in the same way as solvent-based adhesives, but contain no solvents and therefore, are low odor. Water-based adhesives can only be used with fleece-back membranes, and flash off times are typically longer for water-based adhesives than for solvent-based adhesives. Like solvent-based adhesives, water-based adhesives are typically installed in temperatures above 40 degrees Fahrenheit (4.44 °C).
  • Spray single-ply roofing adhesives are the newest in the market. These adhesives are applied using a spray canister and can cut membrane installation time in half compared to traditional bucket and roller adhesives. Flash off time for spray adhesives is typically much faster than for traditional bucket and roller adhesives. Additionally, spray adhesives can be applied in temperatures as low as 20 degrees Fahrenheit (-6.67 °C).
  • Low-rise foam canisters are two-part polyurethane adhesives mixed together in canisters with hose attachments. Two-part adhesive systems provide faster membrane installation that traditional bucket and roller adhesives, but can only be used on fleece-back TPO membranes.

Comparison of Adhesives and Installation Requirements

Comparison of Adhesive Type

Pros and Cons of Using Single-Ply Adhesives

In addition to the pros and cons of each type of single-ply adhesive, there are also pros and cons to installing adhered single-ply systems generally. There are a number of benefits, according to Chris McGroarty, Director of Commercial Membrane at GAF.

  • Adhered membranes don't experience fluttering because air cannot get under the membrane. Their higher wind uplift ratings make them a good choice for coastal locations and high wind areas.
  • An adhered single-ply roof is more impact resistant when you adhere your cover board and then adhere the membrane, eliminating exposed screws and plates. Impact damage often occurs in mechanically attached systems when screws and fasteners are hit by hail.
  • Adhered single-ply roofs have a smoother finished appearance versus mechanically attached.
  • Adhered systems are often covered by longer warranties.

However, McGroarty also noted that single-ply adhesives aren't right for every project. There are some potential drawbacks to using them.

  • An adhered system can be labor-intensive. The substrate may require extra fasteners, and many adhesives need to be applied to both the substrate and the membrane.
  • Crews must be up to speed on the specific manufacturer's recommended application rate and be able to recognize when the adhesive is tacky enough to form a strong bond.
  • Water-based adhesives in particular have limitations on their transportation, storage, and use. You'll want to account for additional time and labor to store them in a warm place.
  • Finally, spray equipment used with adhesives must be kept in good working order; failure to properly maintain equipment can cause clogs in the gun or hose. Equipment must be cleaned, adding time and labor.

Choosing the Best Installation Method

There isn't a one-size-fits-all solution for every installation. You may choose a different installation method like mechanically attaching the membrane. Mechanically attached systems typically install more quickly and with less labor than an adhered system. If the building is occupied and the odor of an adhesive is undesirable, this may be your best bet.

However, if impact or wind uplift resistance is important to you, there are a number of reasons an adhered system may be the better option. It all comes down to understanding what's right for your project.

If you need support in determining the best installation methods and adhesives to use based on the building design and owner's needs, your local GAF territory manager is happy to help.

About the Author

Karen L. Edwards is a freelance writer for the construction industry and has a passion for roofing, having worked in the industry for 20 years.

Related Articles

Roofers install a GAF EverGuard PVC roofing system.
Commercial Roofing

How PVC Experts Can Help Design Specialized Roofing Projects

With the growing popularity and versatility of PVC roofing systems, GAF has responded by building a team of PVC experts to aid architects, specifiers, and the design community in project success. These highly trained and experienced professionals offer 1:1 support to help answer customers' questions and unique needs when working with PVC on roofing projects, and are here to help you!PVC, or polyvinyl chloride, is a single-ply thermoplastic roofing membrane. The material's characteristics help it thrive in particularly challenging applications. In fact, PVC roofing systems have a proven track record in the US, first introduced in the 1970s after making their debut in Germany a decade earlier.Here's a look at the benefits of PVC roofing systems as well as the guidance and support offered by the PVC experts at GAF.PVC Roofing Advantages and ApplicationsWhile several materials are available for use in roofing systems, PVC has been identified as a particularly long-lasting option. Accordingly, it's steadily grown in popularity nationwide.David Allor, senior area PVC specialist, joined the GAF team in 2022 as a PVC expert. His role was created specifically to support roof designers. Allor has an extensive background in the commercial roofing industry and extensive knowledge about PVC as a high-performance roofing solution."The industry refers to it as a very spec-driven product, and I believe what they're speaking to is a specifier's preference to work with a product that's been well established in the market and field tested," Allor shares. "It has the ability to provide protection against chemical exposure* and stand up well to challenging environments."While PVC may be a spec-driven product, it's also application-driven. Allor explains that PVC roofs may help provide protection for restaurants, food manufacturers, and packaging plants—any facility using animal fats where oils may be exhausted.* He also says that even if the building itself isn't exhausting gases, grease, or chemicals, it's important to consider the buildings and structures that surround it, as their exteriors may be subjected to exhaust that could degrade roofing systems.*Supporting the Design CommunityAs North America's largest roofing materials manufacturer, GAF has equipped teams with the resources and specialists needed to supply customers with more than just products. In recent years, the company built a solid team of PVC specialists that cover the entire US. These specialists assist customers with PVC specifications, roof system designs, and whatever else designers need to ensure successful project outcomes.Whether your project or design firm is based in the Northeast, Southeast, Southwest, Midwest, or West Coast, a PVC specialist is positioned to help. Allor explains the team of GAF PVC specialists is active in the organizations specifiers belong to, including the American Institute of Architects, the Construction Specifications Institute, and the International Institute of Building Enclosure Consultants.Allor describes the team's role as supporting the customer and connecting them to other GAF project support teams that can help. For instance, he said he called on a leading architectural design firm in the Boston area—and two months later, someone reached out for assistance with a specific project needing a tight turnaround."Literally within 12 hours of them reaching out to us, we replied and committed to three pertinent deliverables, those being a Tapered ISO Design Package, an Assembly Letter confirming all FM Requirements, and last but not least, a conference call the next day with the Building and Roofing Science team to go over three critical transitional details." Allor says.Committing to Successful Project OutcomesThe PVC specialists at GAF are focused on one goal: helping architects, specifiers, and the roofing design community achieve successful project outcomes through a high-performing PVC roofing system. With professionals like Allor providing insight and guidance, you can rest assured your PVC project will be in good hands.Ready to get started on your next PVC roofing project? Explore the different PVC roofing solutions available, and visit this page to find your local PVC roofing specialist who is ready to assist you.*GAF warranties and guarantees do not provide coverage against exposure to chemicals, grease, oils, animal fats or exhaust. Refer to gaf.com for more information on warranty and guarantee coverage and restrictions.

By Authors Karen L Edwards

April 22, 2024

A roof with a fleeback membrane being installed by contractors.
Commercial Roofing

What to Know about Fleece-Back TPO

As a contractor, you're constantly on the lookout for ways to get the job done quickly while continuing to provide a high level of quality to customers. Carefully selecting the materials you use can help—and with new roofing technologies being developed every day, you have a lot of options.Thermoplastic polyolefin (TPO) single-ply membranes are a cost-effective solution for commercial roofs. And when you add a fleece backing, the resulting fleece-back TPO adds even more durability, protection, and strength to the system. The material can be used for both reroofing projects and new installations.The Benefits of Fleece-Back TPO MembranesHere are a few reasons TPO with a fleece backing might be the perfect solution for your next roofing job:1. Performance and DurabilityFleece-back TPO, like GAF Everguard® TPO Fleece-Back Membrane, provides excellent performance and durability. It's available in a variety of new thicknesses that make it easier than ever to find one that's suitable for your project. For instance, the GAF EverGuard® TPO Fleece‑Back 100, 115, and 135 Membranes offer good impact resistance, as some systems are approved under Factory Mutual (FM) 4470 - Very Severe Hail (Class 1 - VSH).* These membranes are especially suitable for high-traffic roofs, because they provide added protection during regular maintenance of HVAC systems, for example.2. Ease of InstallationInstalling fleece-back TPO membranes can be done easily and efficiently, saving roofers time and labor. They can be mechanically attached for fast installation, or combined with adhesives like the GAF LRF Adhesive XF to reduce overall thermal bridging and add wind resistance capabilities.Commercial building owners and property managers that want jobs finished as quickly as possible will find mechanically attached fleece-back TPO membranes to be an excellent option. Watch the following video to see how they're installed:Because of their versatility, fleece-back TPO membranes are also a popular choice for reroofing projects if your customer isn't looking to completely remove an existing roof:3. UV Ray Protection and Energy SavingsFleece-back TPO membranes come in white and light colors, and they're designed to be ultraviolet (UV) resistant and reflect the sun's rays. By reflecting the sun rays away from the roof, white or light fleeceback TPO membranes can help lower the temperature of the roof and increase the roof's longevity.4. Excellent Warranty or Guarantee CoverageThe robust build of fleece-back TPO membranes means manufacturers can often offer good warranty or guarantee coverage. Depending on the thickness of the membrane and the method of attachment, you could be covered from 20 to 25—or even up to 30—years. This reflects confidence in the quality of the material and provides peace of mind for property owners and managers.Other Considerations for Fleece-Back TPO RoofingWhile fleece-back TPO membrane is typically more expensive than other commercial roofing solutions like smooth TPO, the installed cost may be comparable depending on the installation method used: you can estimate the cost of the EverGuard® Fleece-Back TPO needed for your project using the TPO Material Calculator on the GAF EverGuard® TPO Fleece‑Back Membrane product page. As an added benefit, GAF EverGuard® TPO membranes are made in the U.S.A. with domestic and imported materials.The speedy installation possible with these membranes is convenient for customers and contractors alike, and the durability provides long-term performance. Plus, the fleece-back TPO works well in all areas—even those with harsh weather—so it's not limited to specific locations.If this TPO sounds like the perfect material for your next project, visit the GAF EverGuard® TPO Fleece‑Back product page to learn more.*See FM Global Data Sheet 1-34 for more information. Visit RoofNav.com for approved assemblies.

By Authors Mark Soto

June 27, 2023

overburden installations
Building Science

Overburden

Since its inception a roof's primary purpose has been to shelter its inhabitants from the elements, but now the underutilized potential of roof surfaces is being realized. For roofs with large surface areas, the potential for large overburden installations, such as solar, vegetative roofing, or amenity decks can be exceptional. Even smaller roofs can have overburden that make a significant impact on the sustainability goals of a building including: increased energy efficiency, stormwater retention, energy generation, biohabitat restoration, food production, reduced urban heat island effect, and outdoor space. However, selection of the overburden system is only part of the design. Selection and design of the roof membrane, the waterproofing layer that protects the building, is critical for a long-lasting installation. Failure of the membrane, whether it requires repair or replacement, may necessitate removal of the overburden. The removal of the overburden can result in lost energy generation for solar installations, and loss of rainwater capture for both vegetative and blue or purple roof assemblies. Appropriate selection of the entire assembly, including proper detailing and integration of the roof assembly, as well as installation, are paramount to the overall success and longevity of the overburden system. Overburden Assemblies Roofing overburden is defined as "any manner of material, equipment or installation that is situated on top of, and covering all or a portion of, a roof or waterproofing membrane assembly."* This excludes thermal insulation but includes: planters, vegetative roof assemblies (both trays and built-up), loose gravel, water tanks, void fill (like EPS, XPS, and/or Polyiso rigid foam), tiles, pavers, supporting pedestals, equipment, and solar PV arrays.* While each property is unique, there are many overburden options and roof assembly considerations to meet sustainability goals. Vegetative Roofs: Vegetative roofs are plants that are installed in trays or built in-place on the roof with extensive or intensive plant configurations. Tray systems and extensive roofs are generally in depths of less than six inches and consist of shallow rooted plants, such as sedums. Intensive vegetative roof systems have deeper soil depths and can accommodate larger plant installations. Blue Roofs: Blue roofs are systems that are designed to provide stormwater detention. Rainfall onto the roof is managed using orifices, weirs, or other outlet devices that control the discharge rate of rooftop runoff. Blue-Green Roofs: A blue-green roof is a blue roof with a vegetative roof assembly. Purple Roofs: A purple roof is a "sponge" roof that incorporates a sponge-like layer made of hydrophilic mineral wool, a dense polyester fabric detention layer, and may or may not include an additional honeycomb layer to increase the volume of rainwater that can be retained and detained . Rooftop Solar: Solar PV panels come in both single sided and bifacial (double-sided) modules. A bifacial module can produce power from both sides thereby increasing the energy generation. Modules are supported by racking systems on the rooftop that are either mechanically attached to the roof, mechanically attached to a structural canopy that is attached to the roof, or held in place with ballast. Agrivoltaics: The emerging practice of agrivoltaics, or agriculture combined with photovoltaics, is showing promise as a mutually beneficial symbiotic solution to not only increase the efficiency of solar panels, but also increase plant size and crop yields by shading and limiting soil evaporation Roofs have the potential for many types of overburden installations including vegetative assemblies, plaza decks, and incorporation of multiple types of assemblies. Roof System Considerations Selection of the roof membrane, the waterproofing layer that protects the building, is critical for the success of overburden installations. The membrane performance and roofing assembly configuration, including location of the membrane in the assembly must be considered. Improper selection of membranes can result in leaks, costly repairs, or even replacement. Special considerations like the type of insulation and cover board should be explored. Most importantly, the roof system should have a lifespan that is equal to or greater than the overburden system. Membrane performance is not only dependent on the overburden and associated roofing assembly materials, but also the design and installation. Roof assembly selection and specific design details down to the last termination and penetration detail should be provided to ensure the roof is installed in accordance with the contract documents. Membrane Selection Single-ply membranes can be an excellent choice for overburden installations as they can be used at the deck level and at the top of the assembly. Membranes that will be used at the deck level, such as for vegetative assemblies, should be evaluated for durability and longevity since access to them for repairs will be limited. Solar is typically installed directly on the membrane. For blue roofs and water catchment systems, single-ply membranes are commonly used at the top of the assembly and it is recommended that single-ply membranes meet NSF P151 water standards. Membrane Color For roof assemblies where the membrane is exposed and at the top of the assembly, such as for solar panel installations and blue roof assemblies, the color can have a significant impact on the performance of the system and also on the roof surface temperatures. Reflective roof membranes can lower the ambient roof temperature. Using a lighter colored roof can decrease the urban heat island effect in cities, and also may decrease the amount of heat that is able to radiate into a building's interior. For solar panel installations, light colored or reflective roof membranes can lower the ambient roof temperature which allows the panels to function more efficiently. The temperature of a PV panel can significantly impact how much electricity the panel produces; as panels get hotter, they produce less power. According to an article published by GAF, "It is estimated that the efficiency of a PV panel can be up to 13 percent higher when installed over a highly reflective membrane compared to a dark membrane with low reflectance. Also, the use of bifacial PV panels over reflective roof membranes can increase the efficiency by 20-35 percent, as they take advantage of the reflected light. For overburden installations, such as blue or purple roofs where the membrane is exposed, reflective membranes are also advantageous. Even though the roof may not always be holding water, or presumably when water is present it is translucent, a reflective membrane contributes to lower roof surface temperatures. Additionally, vegetative roof systems can take advantage of reflective membranes where vegetation is not installed. Codes require that borders and paths are maintained on the roof for fire, access, and maintenance. Reflective membranes at these locations may lower roof temperatures which mitigates interior heat gain, and also decreases the strain of summer heat on vegetation. For solar panel installations, light colored or reflective roof membranes can lower the ambient roof temperature which allows the panels to function more efficiently. Membrane Thickness Roof assemblies should be installed to match or exceed the service life of the overburden systems. The risk of installing a less robust system, such as with a thinner single-ply membrane, could require roof replacement prior to the end of overburden's service life. An unprotected roof membrane should offer enhanced protection against the effects of UV, high service temperatures, punctures, and added foot traffic to help ensure that the roof's life and overburden will match. For single-ply membranes, thicker membranes can provide protection against punctures from the extra foot traffic for overburden service and maintenance. Single-ply membrane thickness significantly improves impact resistance (such as by dropping a tool) by almost 80 percent from 45 mil to an 80 mil membrane. A thicker single-ply membrane also provides additional protection to both UV and high surface temperatures, which is important since a thicker overall membrane provides more thickness over the scrim (reinforcing layer). This portion of the membrane provides weather resistant properties, including UV resistance. A roof membrane in an IRMA assembly should have added protection to punctures and abrasion from roof elements above it, including root damage in a vegetative assembly. For installations where the membrane is on top, it is a best practice to install walkway pads around solar arrays or exposed areas of single-ply membranes to protect against the added foot traffic to service the installations. Membrane Attachment There are two broad categories of roof attachment; mechanically attached via use of fasteners, and adhered. Attachment methods should be reviewed for ease of installation and energy efficiency. Energy efficiency roof assemblies can be directly related to thermal bridging, which occurs when components allow for heat transfer through the roof assembly. Heat loss means that the mechanical equipment will have to work harder to maintain the desired interior temperatures. Thermal bridging occurs at gaps or discontinuities between materials, such as at fasteners in a mechanically attached system. Particularly where the fasteners penetrate the entire assembly from the membrane through the insulation and into the deck, the fasteners provide a direct thermal path from the exterior to the interior. Mechanically attached single-ply systems are also subject to billowing in high wind events. Billowing, or fluttering, of a membrane is when wind causes a negative pressure by pulling interior air into the roof assembly creating uplift force on the roof assembly. Over time, it can cause stress and fatigue on the mechanical attachments and membrane. Interior air that is pulled into the roof assembly equates to energy loss since often the temperature controlled air may warm or cool based on the temperature of the membrane. Overburden installed over mechanically attached systems may billow and flutter with the roof membrane during high wind events. As the membrane flutters and moves, the overburden will shift on the membrane, causing abrasion of the membrane surface. The overburden may also experience stress and fatigue due to movement, which could decrease their overall service lives. Adhered system where only the first layer of insulation is mechanically attached, significantly reduces interior air loss and thermal bridging. Adhered systems that do not use mechanical fasteners greatly reduce thermal bridging by eliminating the path from the interior of the roofing assembly to the exterior. Adhering also prevents billowing of the membrane, by mitigating the interior air that can be brought into the roof assembly. Insulation Insulation is critical in roofing assemblies for overall energy efficiency of the building. The higher the R-value, expressed per inch, the better the thermal performance of the insulation and its effectiveness at maintaining interior temperatures. Higher R-value per inch means less material is required to achieve the desired insulating value. In overburden systems, the roof system thickness can have an impact on the overall design of the overburden system. For example, roof flashings need to extend a minimum of 8-inches past the completed installation. For vegetative systems, this means that the flashing must extend 8-inches past the vegetation. Flashing heights are of particular importance at mechanical curbs and parapets. For a new construction installation, it is possible to raise the heights of the curbs and parapet walls to the desired height, however, in an existing building, this can be problematic. Insulation boards should be installed so that the joints are staggered and offset, and several layers of insulation should be installed rather than just one thick layer. Gaps between boards can decrease insulating ability by allowing thermal loss, an increased condensation potential if air travels into the roof assembly. Air brings moisture, which if allowed to condense, can saturate the insulation boards. Wet insulation has an R value of approximately zero, which is like having no insulation at all. Staggered and offset insulation board joints. Coverboards Inclusion of a coverboard must be considered after selection of the overburden. Rooftops with overburden assemblies not only have increased foot traffic on the roof, but are also an added dead load on the roof assembly. High traffic areas should always be protected with walkway pads. Adding a high-compressive-strength coverboard below the roof membrane will enhance system protection, including compressive strength. Coverboards provide added protection against penetration, including tools dropped by service contractors, wind-borne debris, and hail. A thicker coverboard increases its penetration resistance. The use of high-density polyiso insulation coverboards should be considered since they not only add protection to the roof assembly, but also add an R-value of 2.5 per half-inch. Overburden Layout, Details & Flashings Qualified design and construction professionals should be involved throughout design and construction phases of roof and overburden systems. Overburden layout should address access for installation and both roof and overburden maintenance throughout the component service lives. Inadequate detailing or termination heights leave the roof assembly vulnerable to leaks. Improperly detailed or flashed components may be water-tight for a period of time, but will most likely fail prematurely. Removal of the overburden system for repairs can be an added difficulty and cost. It is good practice to allow penetrations, flashings, expansion joints, drains, and other critical roofing interfaces to be accessible for maintenance and repairs. Flashings should be installed in accordance with current NRCA guidelines and the roof manufacturer's construction details. Ballasted assemblies can block or inhibit drainage resulting in trapped water on the roof membrane. The overburden layout should leave portions of the roof around drains open for both access and drainage and be unimpeded by the overburden. Summary While the roof is the primary defense to prevent water entering into a building, due to the current market trends and legislation, this previously underutilized asset is being recognized by owners for the opportunity the roof offers. There are many overburden options and roof assembly considerations when meeting sustainability goals. Once the overburden type is selected, the roof needs to be determined, which depends on the type of overburden and the ultimate use of the roof space. The overburden's success depends on the roof assembly beneath. For installations such as solar or vegetation, the plants and solar array will need to be removed for repairs or replacement; so, a more robust membrane for the long-term durability and serviceability of the complete roof may be needed. A performance-based approach for energy efficiency requirements (insulation, thermal bridges, and air tightness) versus a prescriptive code minimum may be warranted to ensure a long-lasting roof and to minimize roof replacements over the life of the building. *Resource: Roofing Contractors Associoation of British Columbia

By Authors Kristin Westover

June 15, 2022

Don't miss another GAF RoofViews post!

Subscribe now